{"id":14304,"date":"2019-06-23T15:09:02","date_gmt":"2019-06-23T15:09:02","guid":{"rendered":"http:\/\/www.naturclimb.com\/special-felling-equipment\/"},"modified":"2019-09-24T11:16:27","modified_gmt":"2019-09-24T11:16:27","slug":"special-felling-equipment","status":"publish","type":"page","link":"https:\/\/www.naturclimb.com\/en\/special-felling-equipment\/","title":{"rendered":"Special Felling Equipment"},"content":{"rendered":"

Aluminum and Steel Equipment<\/h2>\n

The materials: cylinders of friction and pulleys that NaturClimb<\/strong> uses aluminum sound. They are used to lighten the weight during the work in height. These materials must not suffer any blow, although they will be submitted to the load of the tronza that goes to cut.<\/p>\n

Therefore, there will be respected at all times the maximum load of use (C.M.U.) of every element of the chain and the size of the tronza to be cut.<\/p>\n

On the other hand, the mosquetones used for the demolition are of steel. Well of triple closing of safety, good of thread. These elements if they are going to suffer, in many cases, the impact during the fall. The steel will be deformed before coming to the break; in case of distortion it will be warning us before breaking.<\/p>\n

This is a mechanical characteristic it differs to the steel of the aluminum.<\/p>\n

NaturClimb<\/strong> uses it in its different tasks, working inside the maximum safety guarantees.<\/p>\n

Next we show him the elements used by NaturClimb<\/strong> during the works of chopping and sectional tree felling.<\/p>\n

 <\/p>\n

\"Equipo
Equipo de tala y apeos controlados de \u00e1rboles<\/figcaption><\/figure>\n

Descripci\u00f3n T\u00e9cnica de los Materiales de Tala y Apeo Controlado<\/h2>\n